u-blox7チップ、GPS QZSS SBAS or GLONASS 受信 56ch
PS/2 (RS232C)インターフェイス
GPS/QZSS/SBAS or GLONASS 受信
GR-701R USB
GR-701U USB Location Sensor 対応
GR-701W USB USB DCD 1pps出力
GPS |
u-blox7
|
受信方式 |
56ch
|
周波数 |
GPS QZSS L1,1575.42MHz / GLONASS 1598.0625~1605.375MHz SBAS:WAAS,EGNOS,MSAS
|
受信感度 |
-162dBm(測位時) -148dBm(探索)
|
TTFF |
1秒/28秒/30秒(Hot/Warm/Cold 平均)
|
再補足 |
0.1秒 平均
|
位置精度 |
2.0m(WAAS/SBAS有効時)CEP 50% 24hr static -130dBm
|
速度精度 |
<0.1m/秒 <0.5° (50%@30m/s)
|
時間精度 |
1μ秒 平均
|
加速度 |
<4G
|
高度 |
18,000m
|
速度 |
1,852Km/h
|
Protocol |
NMEA 0183V2.3-3.0 UART:9600(default) N,8,1;GGA, GLL, GSA, GSV, RMC, VTG, TXT
|
電源電圧 |
3.3-5.5VDC 37mA
|
サイズ |
36(W) x 42(L) x 15(H) mm)
|
ケーブル |
3m
|
インターフェイス |
Mini-Din-6pincode>
|
動作温度 |
-40℃~85℃
|
ストレージ温度 |
-40℃~85℃
|
湿度 |
95%(結露しない)
|
防水 |
IPX7
|
Certification |
EMC:CE/FCC RoHS
|
USB TypeA |
Pin1-GND Pin2-VCC Pin3-TX(RS232) Pin4-RX(RS232) Pin5-PPS(RS232Level) Pin6-PWR_CTRL
|
LED Color |
LED ON 探索中 LED点滅 捕捉完了
|
BR305-RS232ケーブルを使用する場合は直接シリアルポートに接続します。(または拡張ボードのシリアルポートへ)
Driverのインストールを行いません。
u-center ├── File ├── Edit ├── View ├── Packet Console ├── Binary Console ├── Text Console ├── Message View ├── Configuration View ├── (Generation 9 Configuration View) ├── Statics View ├── Table View ├── Recent Table View ├── Chart View ├── Recent Chart View ├── Histgram View ├── Recent Histgram View ├── (GNSS Driver View) ├── Map View ├── Recent Static Map View ├── Camera View ├── Daviation Map ├── Sky View ├── Docking Windows └── Toolbars ├── Player ├── Reciver ├── Connection ├── Baudrate ├── Tools ├── Windows └── Help
├── Configuration View ├── ANT(Antena Setting) ├── BATCH ├── CFG(Configuration) | └── Revert to last saved configuration | └── Revert all but ANT default configuration | └── Revert default configuration 工場出荷状態に戻す | └── Save current configuration 変更を保存 | └── User defined configuration │ ├── DAT(Datum) | └── WGS84 ├── DGNSS (Differential GNSS configuration) | └── 3=RTK fixed: Ambiguities are fixed whenever possible. ├── DOSC(Disciplined Oscilator)- ├── EKF(EKF Setting) ├── ESFA(Accelerometer Config) ├── ESFALG(IMU-mount Alignment) ├── ESFG(Gyroscope Config) ├── ESFGWT(Gyro+Wheeltick) ├── ESWT(IMU-mount Alignment) ├── ESRC(IMU-mount Alignment) ├── FXN(Fix Now Mode) ├── GEOFENCE(Geofence Config) ├── GNSS(GNSS Config) | └── GPS 有効/無効 | └── SBAS 有効/無効 | | └── QZSS 有効/無効 | └── GLONASS選択 有効の場合は他を受信できません。 | ├── HNR(High Nav Rate) ├── INF(Inf Messages) ├── ITFM(Jamming/Interference Monitor) ├── LOGFILTER(Log Setting) ├── MSG(Messages) | └── F0-00 NMEA GxGGA | └── F0-01 NMEA GxGLL | └── F0-02 NMEA GxGSA | └── F0-03 NMEA GxGSV | └── F0-04 NMEA GxRMC | └── F0-05 NMEA GxVTG | └── F0-06 NMEA GxGRS | └── F0-07 NMEA GxGST | └── F0-08 NMEA GxZDA | └── F0-09 NMEA GxGBS | └── F0-0A NMEA GxDTM | └── F0-0D NMEA GxGNS | └── F0-0E NMEA GxTHS | └── F0-0F NMEA GxVLW | └── F1-00 NMEA PUBX00 ├── NAV5(Navigation 5) | └── Navigation Modes | | └── Dynamic Model | | └── Fix Mode | | └── UTC Standard | └── Navigation Input filters | └── Navigation output filters ├── NAVX5(Navigation Expert 5) | └── Navigation Input Filters | └── Miscellaneous | | └── GPS Week rollover(1867 20151018-20350602/ 1936 20170212-20360927) | └── AssistNow Autonomous | └── ADR/UDR | └── Sugnal Atenuaton Compensation ├── NMEA(NMEA Protocol) | └── CFG-NMEA-DATA2 | | └── Filters | | └── NMEA Version | | | └── 2.1/2.3 | | └── Max SVs per Talker Id | | └── Mode Flags | | | └── Conmatibility/Consider/Stict limit 82ch max | | | /High precision mode | | └── GNSS to filter out | | └── Numberring used for SVs not supported by NMEA 0/1 3digit | | └── Main Talker ID 0/1 2-5 | | └── GSV Talker ID 0 | | └── BeiDou Talker ID ├── ODO(Odometer/Low0speed COG filter) ├── PM(Power Management) ├── PM2(Extend Power Management) ├── PMS(Power Management Setup) ├── PRT(Ports) | └── Target 1 UART1 | └── Protocol in 0+1+2 UBX NMEA RTCM2 | └── Protocol out 0+1 UBX NMEA | └── Baudrate 4800-921600 | └── Databits | └── Stopbits | └── Parity | └── Bit Order ├── PWR(Power) ├── RATE(Rates) | └── Time Source 1 GPS time | └── Measurement Period 1000[ms] | └── (Measurement Frequency 1.0[Hz]) | └── (Navigation Rate 1[cyc]) | └── (Navigation Frequency 1.0[Hz]) ├── RINV(Remote Inventory) ├── RST(Reset) ├── RXM(Receiver Manager) ├── SBAS(SBAS Settings) | └── Subsystem Enabled | └── Services | └── Number of search channels 3 | └── PRN Codes Other 120,123,127-192,133,135-138 ├── SENIF(Sensor Interface) ├── SLAS(SLAS settings) ├── SMGR(Sync Manager Config) ├── SPT(Sensor Production Test Config) ├── TMODE(Time Mode) ├── TMODE(Time Mode) ├── TMODE(Time Mode) ├── TP(Time Mode) ├── TP5(Time Mode) ├── TXSLOT(Time Mode) ├── USB(Time Mode) ├── VALDEL(Time Mode) ├── VALGET(Time Mode) └── VALSET(Time Mode)
詳細はドキュメントData sheet (関連u-blox7 Command)などをご参照下さい。